SG ?'s
I have a 100 with a 10HP Compression release engine. I was told that the engines with the compression release require a smaller diameter pulley than the non compression release engines. The non compression release engines have a lager pulley for torque to turn over the engine. I believe that I have the wrong pulley on the SG. I ordered a new belt from my local Cub dealer went to install it and the SG was pulled tight to the engine and I still couldn't get the belt on. Finally I got several belts from NAPA untill I found one that fit. The only problem is now the SG is all the way out from the engine as tight as I can get the belt with the adjustment bracket and the belt is loose and slips. I guess where I am going with this is can someone let me know what the correct diameter of the pulley should be. Mine currently is a 3" for a 3/8 belt.
Thanks,
Scooter
__________________
He who dies with the most TOYS WINS !!!!!!!!! :biggrin2.gif:
|