I have another column. May go through it then just swap them out. First thing will be the axle pin. It is so worn that when I turn the wheel I can see the axle move front to back hehehehe. Replaced a couple of the tie rod ends a while back, but the loose steering arm/bolt on the left spindle seems to be the biggest problem for now.
VERY hard to steer it as it is, could be spindles rusting up in the axle as well. I will take it all apart and clean / de rust everything I can.
I will also look into a pin in stead of the bolt, but seems to me with the correct bolt it should not move. Once I get it apart I will know better which way to go.
-Dave
|