Did a little to the 44C deck today.
Idler arm assembly and shoulder bolt were seized together. So it went into the heat box and with a little persuasion it came apart.
It (idler arm) is somewhat rough inside. I used some emery cloth and cleaned it up inside where the shoulder bolt moves free. Do any of you think this will be ok, it's not sloppy loose or tight by any means. Or should I be on the lookout for a different one? Opon assembly, do you just grease it up and put it together? There is no grease zerk on the idler, and it's to thin to add one.
Also cleaned up the deck hangers and shot some primer on them. The deck will be taken into the sandbasters, to cold here for me to do it outside. (-3 right now)
One last thing. Is the paint color 935 for this deck?
Thanks
|