help with the 127
Diesel man 1 . i have the same problem ,with my 125 ,would not start ,i also rebuilt the hydro as well ,thought the problem was in the hydro ,so i removed the drive shaft ,and it fired right up ,so pulled the hydro down again ,every thing was fine ,reinstalled the drive shaft ,would not fire ,pulled the drive shaft again ,and pulled the spark out ,and rolled the engine over ,no problem ,but i did hear a clicking noise ,removed the cam cover ,and seen the c/r was clicking ,so tied a thread on the spring ,and removed it ,installed a new spring .with the thread on it ,sure didnt want it too fall in the pan ,removed the thread ,set the engine back down ,with every thing back together ,fired right up ,sptong was less then $2 bucks .hope this helps .David
|