Quote:
Originally Posted by cub149
I made a grille yesterday for the front. I used a piece of bar gratting. Cut the angle on the sides to match the front opening and welded on side pieces to frame it in. I then welded two bolts to it that fit in the slot where the spring went on the original grille. I wanted a grille that the slats where closer together but couldn't come up with anything.
I decided to just let the exhaust blow straight throuh the grille since it is steel. I'll use some high temp paint on the grille. It seems a bit louder with the shortened exhaust pipe but not bad. I could cut a hole and stick the pipe out the front but I like the looks without. Is there any reason this would be a bad thing?
|
Boy that's a sharp looking tractor! I'm not trying to sidetrack you, but what color you going to paint it? Bet if you did the grille in silver and did red and white that would be awesome! Just a thought, looks great in yellow too!
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift.
|