Quote:
Originally Posted by BCDSFCRET
 Take both of the valves out ant tap them on a hard surface on the nut end.
Reinstall them and try your hydro. It should work just fine. I had one stick on one of my 782s and it has not done it since.
Good luck.
Brian |
Haha....I did that and on the third tap the whole unit flew apart into about 5 different pieces!!! I think it had been repaired and and had a very weak weld on it and the other one was definitely stuck---the spring is sideways and through the holes!! Two more automatic valves are on the way and I'm very glad that I found out what a horrible shape those were in. It probably would have worked if the PO had taken better care of this machine.
Cub Cadet 123