Quote:
Originally Posted by prskier17
Thanks for all the advice so far guys. It's actually the middle left bolt... not the top. It's definitely below the fill level of the fluid. I've attached a photo showing this. I agree that a sealing washer would do the trick if I went back to a bolt instead of the stud... otherwise there might be a small leak between the stud and nut through the threads that a sealing washer wouldn't help. I did find this that should work though:
http://parts.digikey.com/1/parts/984...8-16-aj-6.html
I know that welding cast iron isn't an easy task... but I'm wondering if I found someone with good tig welding skills this might be repairable. Anyone ever done this???
 |
I had a 1450 with the same problem mine was the bottom left bolt hole, I welded mine with a cast rod and it was okay, so if you can find a good welder it is fixable.