View Single Post
  #2  
Old 05-21-2012, 11:44 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,880
Default

Lots of possibilities with this one. Is it a mower or engine problem? For the mower check
1 Blades sharp and the lift wings are not worn out.
2 Spindle bearings greased, in good condition and they turn freely
3 Belts in good condition not slipping
4 Idler pulleys good condition and they turn freely
5 Grass build up on the underside
6 Baffles in place.
7 PTO working properly


Engine
1 Tuned up
2 Clean air filter
3 Clean fuel
4 Clean fuel filter
5 Valves adjusted to spec
6 Carburetor clean and working properly
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote