Quote:
Originally Posted by BIGMOZEKE
Hey Guys.......thanks for the push on this.
I think that I see the problem in the diagrams. This is driving me crazy as I am not home to go check it out RIGHT NOW !!!...
For the most part, I just unplugged and replugged everything in on that tractor when I put the motor in it without knowing that anything could have been wrong but now I see that the problem may be the wrong wire is going back to the solenoid. Will check it out ASAP tonight when I get home and post the findings.
Also CADPlans said that if it started the engine that everything with the starter should be fine...this thing is dead shorted to ground so I am sure that there has to be something inside the starter case that is grounding out that can't be good.
I will get the charging problem worked out first and then work on the starter.
Thanks a bunch guys.......you are all a great bunch.
|
ok,
if you take the starter apart you will see that it is not a dead short, but it is the continuity through the heavy windings,through the brushes to ground--perfectly normal!
I admire your quest for knowlege but sometimes you just have to "believe" Ha,LOL!