Quote:
Originally Posted by MWShaw
Thanks for the service buletin on pinning the govener shaft.
As far as the in and out of the oil lines, I'm believe the center hole is the pressure or feed port. The vacant area below that is the return? I plan the plumb the "feed" or pressure hole, to the center of the filter head adapter. This would drive the oil from the center of the filter, outward.
I think thats right?
|
IIRR ideally filters input liquid on the outside of filter as there is more surface area for filtration,and
the fluids exit the filter in the center.
there is a diagram on this forum somewhere thinking it is labeled "A" & "B"
I'm sure someone will chime in.