Quote:
Originally Posted by yesmar74
This was yesterday morning,a really nice day considering it's early March. Last week we had about 75 ton of stone hauled in on our lane. The guy that hauled the stone done a good job spreading it except were he stopped and started in one place. So I sure hated to, but I put the blade on the 782 and leveled it off. HE- HE- HE Sure felt good getting some seat time. That's the first work I've done with the 782 since the briggs repower, and it worked really good. Before I could do any grading I had to make a lift rod for the 782 since that was the first time I had put the blade on the 782. Shown below is the white adjustable one I had made for the 149 and the red one for the782. The one for 782 had to have a slight bow in it to clear the spread frame. Before I made the new rod I pulled the tractor's front tires up on two 2x4 blocks so I could measure the rod, so I could get some added down pressure on the blade once done.
[ATTACH]22066[
|
Your looking way too relaxed doing that. 
That pic would have looked good in a Cub Cadet pamphlet a few years ago.
__________________
DWayne
1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck
10" moldboard plow
2016 XT1 42" deck 18HP
|