These diagrams are for a install of a 2185 Engine into a 982 using a 2185 Key switch.
The 982 did not have a Oil Warning Light. Thus you have to either add that or disregard.
The diagrams are colored coded as best as possible. Running the wires from the engine connector to the key switch, 14AWG wire should be used. Color(s) of your choice.
Any question(s), just post back.
Good luck.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|