1650 cranks slow - usually
My K341 cranks slow most of the time but not all the time. I've set the timing, put in new points, plug, coil, condenser. Cleaned the carbon and replaced the gasket. Checked connections and all was well. When it was apart I could see the exhaust valve lift for the ACR. After that it cranked fine again but in short order it was slowed. I even tried jumping straight to the starter and it was slow. Previously I did replace the starter with another used one and it cranked fine for a little bit. It seems to me it is not releasing the pressure because of the pressure coming out of the carb. Could the ACR be intermittently working?
|