Quote:
Originally Posted by 72-149
i was woundering if any body tryed to mount a plow/snow blower frame from a cub cadet 3225 on the front of a 982 i think its possible & would be easyer on the tractor/rock shaft.was woundering if it would fit with some ingenuity.  |
I have been thinking of doing that exact thing. All that is needed is a "mule drive " mount that will accept it. The mount that I have on my 1211 could easily be made to work with one. I have used the mount on mine for over a year now with no problems. I put 3/4 or 1 inch (whatever fit) bolts through the frame were the 2 access holes are on the side and replaced the Frankenstein bolts with regular bolts on the rear were it slides in. Tighten everything down and it will not move.
__________________
Sold everything but one.
1211-snow pusher, cab ,54 inch plow, loaded tires (all 4) Gilson wheel weights, X-trac fronts- soon to have power steering and dual hydraulics
|