Oh Crap!
Are you asking about the throw out bearing??? I thought you were talking about the bearing way up on the front end of the shaft.
Listen to Matt he just went through throw out bearing problems...
As far as the brake thing goes, there is only one brake on an Original it's on the left axle, there is none on the right at all.
From what you describe it sounds like the pressure plates are either stuck to the clutch OR your brake is coming on before your clutch is disengaged. Unhook the brake rod and start it up (someplace where you can't crash anything) try driving it with the rod unhooked and see if it starts and stops like it should (DO THIS ON THE FLAT GROUND IN FIRST GEAR SO NO ONE OR NOTHING GETS HURT). If you think it's going to get away from you, don't panic, just reach down and turn the key off.
|