Sugarmaker : Thanks! I have really enjoyed how my tiller looks and works, now to answer your questions,I got the tin and extra tines for the extensions when I got the tiller, the only part I made is the pice of pipe that drives one of the extension tines. As far as filling the pits, I used a good body filler,a thin glaze, then sand it down to where it just fills the pits, if you have layer over whole pice it will crack for sure. Of course get it good and clean to start. Now the tines that were on eBay I never tried, as it tills just fine, and from your pictures I would try yours first and see how it tills. Hope this will help you out, any other questions just ask!
Can't wait to see how yours comes out!
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift.
