Also to everyone with the pleasure of mech. pto situations.
You need to purchase an extra 7/16" open end or combination wrench. Grind the sides of the open end to the thickness, or a little less than the thickness of the jam nuts that lock the thrust lever bolts (3) in on the backside of the pto. Dedicate this wrench to a pto repair box and you won't regret it. You can use any other 7/16" wrench for the outside nut but the inside nut is hard to hold with a standard thickness wrench. I even painted my wrench to keep myself reminded to leave it with the pto adjusters, etc.
Just another two cents worth . . .
|