11-23-2011, 12:16 AM
|
 |
Grand Member
|
|
Join Date: Nov 2010
Location: Albion PA
Posts: 1,857
|
|
plow points
Plow: Some before shots, then some shots of the parts coming out of the electrolysis, wire brushed, primed, and painted. Might be able to start assembly by Sat.? I put the plow share in the "E" tank for about 4 hours tonight and it was pretty good ( rust was all loose). Lots of black stuff comes off after removing from the tank during first hand wire brushing and water rinse. Then I blow the parts dry and go over them with a stainless steel course wire brush on a 4-1/2 inch angle grinder. Then I wipe them off and prime, let dry and two top coats of white.
Regards,
Chris
__________________
Casbohm Maple and Honey
www.mapleandhoney.com
Cubs: 147 R and the "train", 127 elec lift, 127, 125, 106, 102, 100, 86, 73, Brinly plow, Snow thrower, 2 Rototillers, several mower decks and several snow plows, #1 cart, Grandkids barrel cart.
|