Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   149 Cam Stop (https://www.onlycubcadets.net/forum/showthread.php?t=8652)

cef2lion 02-08-2011 10:03 AM

149 Cam Stop
 
The 149 I just got was missing the cam stop and knob for the lift. I have them now. There is a hole in the frame where it goes but the hole isn't threaded. Am I'm missing something inside the frame that it threads to? Parts diagram show the cam and knob. Not enough detail on the frame picture to figure it out. Not sure if someone knocked something off the frame that the knob would thread to.

JOHN SCHUTTE 02-08-2011 11:15 AM

Someone please correct me if I am wrong, but there should be a nut welded to the inside of the frame that the knob threads into. I may be wrong, b/c I am not at home to look at mine.

cef2lion 02-08-2011 11:22 AM

I was thinking along those lines and thought someone could confirm. The rear 3pt lift arm is in the way looking on the inside of frame. I put my finger through the hole and can't feel anything on the inside like a nut was removed. Not sure why someone would do that unless the lift hit the cam and popped off the inside nut.

cub149 02-08-2011 05:06 PM

2 Attachment(s)
There should be a large nut welded to the inside of the frame. Here is a picture.

cef2lion 02-08-2011 05:48 PM

Thanks for the picture. That shows what I'm missing. I should be able to tack on a repacement.


All times are GMT -4. The time now is 11:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.