Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   Narrow Frame Hyd. Lift (https://www.onlycubcadets.net/forum/showthread.php?t=7950)

litlmikeyl 12-28-2010 09:05 PM

Narrow Frame Hyd. Lift
 
I have a NF hydraulic lift that needs to be rebuilt. Its all there, just needs to be gone thru. Is there a rebuild kit available for these units?

oldironlindy 12-29-2010 02:14 PM

I do not think so. I wish there was I have a couple on the shelf that need a rebuild.

nickvanorman 12-29-2010 04:07 PM

im sure there are other parts that will fit them. hoses and fittings and seals and stuff. i have one and i want to put new Hoses and fittings on it. since someone painted over the hoses WHICH I HATE WHEN PEOPLE DO THAT. the paint cracks and looks horrible.:bash2::bash2::bash2:

Yamaguy 12-29-2010 04:13 PM

I wish there was I have one I want to go thru before I install it!

Matt G. 12-29-2010 05:03 PM

nickvanorman-

If the paint isn't too old, lacquer thinner will probably remove it from the hoses.

IHinIN 12-29-2010 05:16 PM

I fixed one for Mrcubcadet that was leaking around the shaft behind the pulley. There are only a couple of seals in the pump to replace. There's 1 on the shaft just behind the pulley and another on the spool that is a square o-ring but a regular round 0-ring will work. He got the seals from the Cub Cadet dealer so I don't know the part numbers.

mrcubcadet 12-29-2010 07:00 PM

Quote:

Originally Posted by IHinIN (Post 52281)
I fixed one for Mrcubcadet that was leaking around the shaft behind the pulley. There are only a couple of seals in the pump to replace. There's 1 on the shaft just behind the pulley and another on the spool that is a square o-ring but a regular round 0-ring will work. He got the seals from the Cub Cadet dealer so I don't know the part numbers.

I may still have have the part numbers, I will check. :ThumbsUp:

mrcubcadet 12-30-2010 04:27 PM

Quote:

Originally Posted by mrcubcadet (Post 52296)
I may still have have the part numbers, I will check. :ThumbsUp:

Ok, the Cub Cadet dealer had to run the input seal off of a Wheel Horse. The number is 5959

The next two are O rings (I think), both are IH numbers. One is 238-5114, the other is, 238-5222.

Hope this helps, :ThumbsUp:

litlmikeyl 06-29-2011 11:32 PM

Pump & Cyl. Mounting Pieces
 
1 Attachment(s)
Thanks for all of the help guys, but I have come to another problem. I'm missing the plate & dowel pin that the cylinder attaches to on the pump mount and my main mount that attaches the pump "U"-shaped bracket to the tractors' frame is all goofed up thanks to the PO's torch fixes and additions. Can any of you give me dimensions for the pieces I pointed to with the red arrows in the picture attached so I can make some new brackets?

I apologize if the picture is of your tractor... Google was nice enough to find it for me a while back and it works great for description purposes here. :Sorry:

Carolina Cubber 07-02-2011 10:33 PM

Send me your email and i will send you a zipfile that cover rebuilding the NF hydraulic pump and cylinder. suprasport@triad.rr.com


All times are GMT -4. The time now is 12:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.