IH 682 pto
 

I started my 682 for the first time after sitting for about 3yrs. and the pto squeels when not engaged, Does it need some lube or somthing more?

It may be the pto bearing which is replaceable.

It could also be the air gap.

Should the pulley spin free or have some resistance?

If you back off the air gap adjustment all the way so the brake plate isn't contacting the rotor, it should spin freely and silently.

My 1811 did the same thing. When I removed the pto bearing it was seized up. I got a new 6206 double sealed bearing at Grainger for about $17.00.

The bearing is in bad shape. Thanks for all the help.

I have a question on the bearing for the PTO. The 6206 normally comes with and ID of 30mm, 1.179in. The shaft is 1.125in. It looks like cub has a shim on the inside to make up the difference. Are 6206's available with the 1.125 ID or has some one found the shim?

Thanks