Exhaust Deflector
 

I put a post on the "Wanted" for one of these. You can still find them new but they cost 22 bucks with shipping!! This afternoon I decided to make one for my 1450 and it's much heavier gauge steel than the factory OEM! A little time and high heat paint and I'm good to go and still have 22 bucks in my wallet!!!

Well?.......How'd you do it?

Patience and the right tools!!

What was your reasoning for wanting to deflect the exhaust?

IH made these for Quiet Lines to deflect the exhaust burns off of front blades and snow throwers. I added it because I put a chrome extension on my 1450 muffler and wanted to avoid exhaust burns on my front blade. Plus I really like "Old School Quiet Lines" and doing Modifications.

I might make one of those... But WHERE DID YOU GET THOSE SICK TIRES FROM?!!! Those are epic!

https://www.tiresavings.com/tireShop...season=Regular

The fronts are 16x6.50-8 and the rears are 23x10.50-12

I need to do that on my 782...the exhaust melts all the snow on the right half of the thrower, which then freezes into a block I have to chip off before I can drive it into the garage...

Thanks Guys......Let me know how long the rounded part that clamps to the muffler needs to be for stock length mufflers and I'll make some more.