Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   seat cover and paint colors (https://www.onlycubcadets.net/forum/showthread.php?t=6449)

JaysNJcub127 09-16-2010 10:06 PM

seat cover and paint colors
 
Hello everyone. I have a 127, and the original seat. I need to recover it and found this place for the covers.
http://store.colemans.com/cart/index...eyword=tractor

does anyone know what one it would be?

2nd Paint colors. My serial number is 312xxx which calls for 902 white. I have a set of wheels that are very nicely redone with 935 and need to paint my fronts and some misc parts and have some 935 in a spray can. Does anyone have any pics of thise 2 colors side by side or can someone give me an opinion of how much different they are.

_DX3_ 09-16-2010 10:13 PM

I put this cover #460801 on my 128 and my 1250. I have a picture of it:

http://i210.photobucket.com/albums/b...0/DSC01174.jpg

Matt G. 09-16-2010 10:13 PM

http://www.ihcubcadet.com/BobsPage/cubcolor.JPG

Diz Jr. 09-16-2010 10:32 PM

JaysNJcub127
Thanks for posting that link. Those are good looking covers. I have a couple that need replaced, i think i will try one.

_DX3_
How hard were they to install?

darkminion_17 09-16-2010 10:35 PM

Matt g,
Ya beat me too it.
I just picked up a quart of 935 to finish the white on my 1211
Now JaysNJcub127 who painted them????????

_DX3_ 09-16-2010 10:42 PM

Quote:

Originally Posted by Diz Jr. (Post 42159)
JaysNJcub127
Thanks for posting that link. Those are good looking covers. I have a couple that need replaced, i think i will try one.

_DX3_
How hard were they to install?

They were actually quite easy. These were there very first seats I have ever recovered. Keep your trim that holds the vinyl onto the seat and reuse that. I layed the cover on the seat, turned the seat upside down and started pulling the excess vinyl up and over the front part of the seat, using a rubber mallet to help push the trim onto the seat edge and worked my way around, just pull and stretch and apply the trim. Once finished, if everything looks fine, use a razor and trim off the excess overlap.

JaysNJcub127 09-16-2010 10:43 PM

ummm
 
Quote:

Originally Posted by darkminion_17 (Post 42164)
Matt g,
Ya beat me too it.
I just picked up a quart of 935 to finish the white on my 1211
Now JaysNJcub127 who painted them????????

some guy up in the sticks in North NJ, he is a super nice guy, but lives too damn far away !!!!

BTW everyone, I bought them from Darkminion and he did a sweet job !!!! I just want to see the 935 next to the 902

JaysNJcub127 09-16-2010 10:45 PM

sweet
 
Quote:

Originally Posted by _DX3_ (Post 42154)
I put this cover #460801 on my 128 and my 1250. I have a picture of it:

http://i210.photobucket.com/albums/b...0/DSC01174.jpg

that looks like the same saet as mine, I will have to order one !!!

_DX3_ 09-16-2010 10:46 PM

I am curious, was there that much of a difference in white between the 128 series and the 1250 series, or has someone used a different white on the 1250?

Diz Jr. 09-16-2010 11:03 PM

_DX3_
Thanks for the info, That sounds like a project i can handle :biggrin2.gif:


All times are GMT -4. The time now is 11:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.