Clovis pin diameter?
 

Hi heroes,

I’m away from my tractor so can’t measure the diameter of the Clovis pins that adjust the height of the ball wheels on my mower deck.

It’s a model #317 48” deck

Thanks!

Here’s a picture of the Clevis pin (maybe?)

https://www.partstree.com/parts/cub-cadet-711-3266/

Here’s a link to parts tree

https://www.partstree.com/parts/cub-cadet-711-3266/

clevis pin.
https://www.ebay.com/itm/336736208569

Thanks.

I know where I can get it, but it’s the DIAMETER I’m trying to find out.

Cheers!

Ummm, measure the hole that it goes through??

Opening post:
"I’m away from my tractor"

They are sold by the part number, not by their size; which does not guarantee fitment.
Try asking the local cub cadet dealer what size they are.

Not a clevis pin but a step bolt

Part # 738-3093


https://cdn.datamanager.arinet.com/i...41c732543d6/30

That part number is 3/8" diameter.

Or the bolt (Cub Cadet 938-3056), which is 1/2"

Can we move on now?
https://www.amazon.com/dp/B098GQ95QY...ect=mhFallback

They are 5/16" and they are 1 7/8" long.
I just measured mine in the ebay link....