Only Cub Cadets
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Kubota Engines (https://www.onlycubcadets.net/forum/forumdisplay.php?f=54)
-   -   CC 2182 WG600 carb rebuild. (https://www.onlycubcadets.net/forum/showthread.php?t=60973)

Cadetpuller 03-10-2023 04:19 PM
CC 2182 WG600 carb rebuild.
 
I just picked up a new to me 2182 with a 54" deck with 1700 hours. It was leaking gas around the carb. I disassembled the carb and cleaned it. That took care of the leaking. However its not running great and I'd like to do a carb rebuild but it doesn't seem like anyone produced such a kit and a new carb is $500.

Has anyone successfully found a kit or just found the individual gasket and seal part numbers?

CubDieselFan 03-10-2023 10:15 PM
I have a good source for Kubota parts. I will email him Monday and see if Kubota makes a kit.

Oak 03-11-2023 08:05 AM
1 Attachment(s)
Did that 2182 come out of North Georgia?

Attachment 112233

If this is the one, you got a great deal and thanks for buying it! I would look at that thing on FB everyday and wanted it bad but I'm trying thin some of mine out and don't need anymore.

Cadetpuller 03-11-2023 11:51 AM
Quote:
Originally Posted by Oak (Post 524141)
Did that 2182 come out of North Georgia?

Attachment 112233

If this is the one, you got a great deal and thanks for buying it! I would look at that thing on FB everyday and wanted it bad but I'm trying thin some of mine out and don't need anymore.
yes thats it.

cubby102 03-11-2023 12:01 PM
Quote:
Originally Posted by Cadetpuller (Post 524126)
I just picked up a new to me 2182 with a 54" deck with 1700 hours. It was leaking gas around the carb. I disassembled the carb and cleaned it. That took care of the leaking. However its not running great and I'd like to do a carb rebuild but it doesn't seem like anyone produced such a kit and a new carb is $500.

Has anyone successfully found a kit or just found the individual gasket and seal part numbers?
You can get the needle and bowl gasket, you have to buy them separately, and honestly not cheap. I think I paid $30 something, a month or so ago. The dealer was able to hunt it down for me.

Cadetpuller 03-11-2023 12:03 PM
Quote:
Originally Posted by cubby102 (Post 524148)
you can get the needle and bowl gasket, you have to buy them separately and honestly not cheap. think i paid 30 something a month or so ago. dealer was able to hunt it down for me.
Mine doesn't have a bowl gasket. The bowl screws up into the body of the carb.

Farmall450 03-13-2023 01:35 PM
Quote:
Originally Posted by Cadetpuller (Post 524147)
yes thats it.
Small world. :beerchug:

Cadetpuller 03-13-2023 04:57 PM
Does anyone have a kubota wg600 manual and a 2182 service manual they could email me?

Cadetpuller 03-13-2023 05:01 PM
Also found a source for carb parts.

https://www.weingartz.com/assembly-d...285-838-164768

ironman 03-13-2023 05:13 PM
Quote:
Originally Posted by Cadetpuller (Post 524180)
Does anyone have a kubota wg600 manual and a 2182 service manual they could email me?
2182 Service Manual here....
https://www.ccpartsnmore.com/cub-cadet-service-manuals


All times are GMT -4. The time now is 09:35 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.