Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   82 series factory style 3 pt questions (https://www.onlycubcadets.net/forum/showthread.php?t=60413)

Radioguy41 09-01-2022 06:58 PM

82 series factory style 3 pt questions
 
1 Attachment(s)
I found this image on the web, do I need this piece to attach the lift bar on my 782 to the rockshaft? Where can I get one? And finally, is there a copy of the 3 pt installation manual for an 82 series?

Thanks.

Farmall450 09-01-2022 07:06 PM

I think it probably uses a clevis pin; that's how the sleeve hitch is ran on the later tractors as well.

I originally thought I'd have to add a lift block for the 1811 or 782, but IH improved the design s.t. only a clevis pin is needed and it is inserted through a clearance hole in the frame.

spndncash 09-01-2022 09:15 PM

1 Attachment(s)
I dont see that pin in the parts breakdown. the pin that attaches to the lift arm has three holes in it.
the attached image shows the parts for the 3pt from cub.

darkminion_17 09-01-2022 09:35 PM

Looks like a float lockout pin.

Radioguy41 09-01-2022 10:19 PM

1 Attachment(s)
This is where it's shown as being used. 82 series is different than other WF's which is why I'm looking for specific info. Supposedly the pin that normally connects the rockshaft to the hydraulic cylinder inserts from the frame side but from what I'm surmising the head of that pin would interfere with the lifting bar so the piece shown above replaces that cylinder pin by moving it to the inside thereby eliminating the interference issue. All this is a theory I've put together based on very sparse info available on the Internet so I'm hoping to find something concrete; photos, actual experience, a specific manual, etc.

darkminion_17 09-01-2022 11:18 PM

#12 in the parts lookup, float lockout pin,flip it one way the cylinder floats, the other it locks the float on the rock shaft.

Oak 09-02-2022 05:34 AM

Aaron has it on his site.
https://www.xtrememotorworks.com/3-P...Cub-Cadet.html



Hey Roland.....this link doesn't work.:BangPC:
https://www.onlycubcadets.net/forum/...ad.php?t=36392

Radioguy41 09-02-2022 06:09 AM

Quote:

Originally Posted by Oak (Post 520484)
Aaron has it on his site.
https://www.xtrememotorworks.com/3-P...Cub-Cadet.html



Hey Roland.....this link doesn't work.:BangPC:
https://www.onlycubcadets.net/forum/...ad.php?t=36392

Thanks, that's the Cat 0 3pt, not what the factory originally called a 3pt.

Radioguy41 09-02-2022 06:15 AM

1 Attachment(s)
Quote:

Originally Posted by darkminion_17 (Post 520483)
#12 in the parts lookup, float lockout pin,flip it one way the cylinder floats, the other it locks the float on the rock shaft.

Here is a copy I found of the instruction sheet. 82 series is different from other WF's.

R Bedell 09-02-2022 06:30 AM

Oak:

Quote:

Hey Roland.....this link doesn't work.
https://www.onlycubcadets.net/forum/...ad.php?t=36392
YUP, that is the OP's link. I have no control over that. I will try and find, a replacement, with a good link.


All times are GMT -4. The time now is 04:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.