New to me 1650 & 1st Post
 

I recently acquired a 1650 that has been sitting in a shed for 15 years. It is a little rough but I got it up and running fairly easy.

I have one problem though, I can't get the pto switch to flip. It looks like you may need to pull it up to flip but it does not move. Before I got crazy and broke something I though I would ask if there is a trick to it.

Bob

You should be able to just pull out on the switch and then flip it to engage.

Bob, my 1200 had the same problem because it sat outside for a few years. I sprayed mine down with Kroil and twisted it with pliers to free it up. (the outside of the switch should be able to turn) Then I was able to pull out on the switch and move it up to the "on" position.

:Welcome2::WWP::WWP:

:Welcome2::WWP:Congrats on getting it running after 15yrs. If was in the shed is it that bad? Please put up some pics

Congrats on your 1650, Bob! :beerchug:

:Cub1::Welcome2::Cub2:

Thanks for all the welcome!

I will work on pics this weekend, I still need to hose it off.

Bob

Bobs85GT

:IH Logo::Welcome2::IH Logo:
Congratulations on the 1650 :ThumbsUp:

Bobs85GT...

:Welcome2: Congratulations on acquiring your cub cadet!! Can't wait to see some pics after it gets a shower!!! Glad to have you in the forum!!!

Cub Cadet 123