Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   1512 no hydraulics (https://www.onlycubcadets.net/forum/showthread.php?t=59312)

Ewilliams 09-28-2021 08:52 PM

1512 no hydraulics
 
Hello. I have a cub cadet 1512 diesel and today I got finished mowing and lost all hydraulics. The tractor does not move and mower deck does not go up or down. Any advice would be greatly appreciated.
Thanks,
Earl

R Bedell 09-28-2021 09:33 PM

Check the "Spirol Pin" at the Hydro Unit input shaft.

Ewilliams 09-28-2021 09:59 PM

I will do that first thing in the morning. I will let you know. thanks

Gompers 09-29-2021 11:37 AM

Yes, most likely a driveshaft issue. If the driveshaft is turning but the hydro isn't, that's your problem. Gotta look carefully too because sometimes it'll still turn until you apply a load to it and then it'll stop spinning.

Ewilliams 09-29-2021 06:31 PM

Just what you said. Put a new pin in and back to mowing. Thank you. I really appreciate your help

R Bedell 09-29-2021 07:40 PM

Must be the Spirol Pin Day. The same thing happened to me, late this afternoon, while mowing lawn.

:bigeyes:


All times are GMT -4. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.