Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   44inch deck chop (https://www.onlycubcadets.net/forum/showthread.php?t=55534)

wagonmaster 07-26-2019 10:24 PM

44inch deck chop
 
Think I might cut off the 8 inches of excess deck that sticks out past the blades on the 44 inch deck under my 1650. The excess is preventing me from getting in between a few places. Comments please.

R Bedell 07-26-2019 10:33 PM

I cut my 50C a little on the discharge end also.

ol'George 07-27-2019 08:12 AM

Save what you circumcise, because you might find out the debris tend to fly up more than you intended.:bigthink:

dodge trucker 07-27-2019 02:35 PM

I certainly wouldn't cut all the way back til the blade tip was even with the edge of the deck! If it's that much in the way, I'd look for a 38" or even a 42" "triangle" deck and hanger. If anyone ever got hurt you'd be opening yourself wide open for major issues
You MIGHT be able to take a couple of inches off, max.

CADplans 07-27-2019 05:23 PM

I have a Gravely 24G with a 72 inch cut deck,, the discharge chute is removed.

I really like it, the mower can be used like a rear discharge mower,, and cut right up against both sides.

I do slow the engine down, if I am near a building, so the clippings do not blow back,,
that really depends on wind direction.

I have ZERO regrets about removing the chute,,, :bigthink:

The resultant opening is kinda "GIANT",,, :bigeyes: (right side in the pic)

https://www.mytractorforum.com/galle...-inch-deck.gif

IHCubCadet147 07-27-2019 08:22 PM

I have seen a picture of one where someone cut a little off, and put it back on with a hinge so you could just lift it up in tight spaces.

wagonmaster 07-28-2019 10:46 AM

Quote:

Originally Posted by IHCubCadet147 (Post 485747)
I have seen a picture of one where someone cut a little off, and put it back on with a hinge so you could just lift it up in tight spaces.

I like the hinge idea

wagonmaster 07-31-2019 10:02 PM

After I retired last year I went to work mowing grass 3 days a week at Watkins Glenn International race track, BTW NASCAR is there this weekend. They put me on a Newholland Boomer 55 with a 72" deck. 55 turbocharged hp of awesome power will make the grass fly. The deck discharge chute was a thick rubber flap that would deform and move out of the way when getting close to a poll or other obstacle . Worked great.

modcub72 07-31-2019 11:48 PM

Ya'll might get funky with what I did to my mower deck,
I cut the front out. It mows though anything. But I have to be a lot more careful when I mow now.
Especially by the road and I always make sure that I keep grass off of the road.
It's really dangerous to cycles on the road.
I sweep it off if any gets on there.


All times are GMT -4. The time now is 03:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.