Only Cub Cadets - Cub 70 PTO clutch & Mule drive restoration complete

Page 1 of 3

Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)

- - Cub 70 PTO clutch & Mule drive restoration complete (https://www.onlycubcadets.net/forum/showthread.php?t=55407)

Cub70

07-07-2019 03:59 PM

Cub 70 PTO clutch & Mule drive restoration complete

2 Attachment(s)

Finished the PTO clutch rebuild and restoration. All new parts other than the housing and back plate. I also finished the mule drive restoration too.
Before:
Attachment 100683

Attachment 100684

Cub70

07-07-2019 04:00 PM

2 Attachment(s)

After restoration pictures:
Attachment 100685

Attachment 100686

Cub70

07-07-2019 04:01 PM

2 Attachment(s)

More restoration picturesAttachment 100687

Attachment 100688

Cub70

07-07-2019 04:01 PM

1 Attachment(s)

Restoration pictures
Attachment 100689

ACecil

07-07-2019 04:17 PM

Great job! :beerchug:

IHscout79

07-07-2019 04:22 PM

YEAP! Great job! Looks good!

R Bedell

07-07-2019 04:36 PM

Looks real good.

:beerchug:

Cub70

07-07-2019 06:04 PM

Thank you for the compliments!

finsruskw

07-08-2019 06:22 AM

FYI

For the pin on deck, the eye bolt holes will probably be too big.
I welded a short piece of 3/8" bushing stock into mine to shim them down to 3/8" to fit the pins on the mule drive.

I also drilled all the holes in the mule drive oversize and tacked a short piece of the proper size bushing stock in those and replaced all the pins where needed.

Makes for a nice tight setup when finished and my deck mows like a new one leaving a near perfect cut.

jbrewer

07-13-2019 08:08 PM

what a great job

you should really be proud of that!

Super nice!

All times are GMT -4. The time now is 05:52 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page