Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Customized Cub Cadets (https://www.onlycubcadets.net/forum/forumdisplay.php?f=11)
-   -   Custom hitch diskgang (https://www.onlycubcadets.net/forum/showthread.php?t=5460)

johncub7172 07-22-2010 11:46 PM

Custom hitch diskgang
 
1 Attachment(s)
Here is some metal I will be useing this saturday to make a hitch for my disks. Like I said before that I have not alot of information of how the 3-point hitch operates in rythem with the diskgang, and after a few trys of pulling them. I made a decision. A fter all, you dont know what you dont know, right? With an Ace up my sleeve, I should come out alright to make this outfit run. One swipe through the tilled garden and it was another 40 miles before I could turn it around! I'am very happy with these as they realy do a number on this half-way tilled soil! I'll be happy to share picts. when its done. Next time I'd like to duel up the rear wheels as I took note why. Love gardens.....Wild Bill done me right! Was not sure where to post, sorry.

ACecil 07-23-2010 12:01 AM

Looking forward to your pics, John! :beerchug:

Methos 07-23-2010 02:29 AM

Looking forward to this one.

johncub7172 07-24-2010 08:55 PM

I sure did find alot of information here at Only Cub Cadets. Alot of fine tallent and great skill shared........Way more than what I'am used to. So the 3 point mount on the rear of the 71 was what I simply built off of. The mount can be removed at any time and the 3 point cub cadet hitch and cub cadet sleeve hitch or what have you can be installed. This set up I made is only for my gang of disks. I believe it to be very formatiable foe in strength and construction. When I can get picts. up, I would like comments good or bad, ideas on improvement I guess is what I'am getting at. Thanks, John

johncub7172 07-25-2010 01:18 PM

Here is the hitch for my disk gang before paint.

johncub7172 07-25-2010 01:42 PM

2 Attachment(s)
Here the hitch is before paint.

johncub7172 07-25-2010 01:59 PM

5 Attachment(s)
Here is the disk hitch I made yesterday. It is no way perfect and I am sure you guys are a lot better, hats off to ya! Its all structure steel. Don't see any bending going on, at the most busted welds, which my welder is a pro!

johncub7172 07-25-2010 02:15 PM

Here are some more. Thats as far as I got. Went with the 1/2 in. holes, had no drill bit bigger. Seems like there is something missing here. The hitch free floats up and down. This is some thing I dont know to be good or bad, as the gardens I use it in are not suddenly hilly or what not. I dont think I'am done here.:American Flag 1::American Flag 1:

johncub7172 07-25-2010 02:28 PM

4 Attachment(s)
:bigthink:

ACecil 07-25-2010 03:58 PM

Awesome pics, John! The disk looks nice behind your cub! :ThumbsUp:


All times are GMT -4. The time now is 11:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.