S/G K161 vs K341
 

Is there a difference in the S/G for a 7hp K161 and a 16HP K341.
I have a new 375 cca battery and used a new "k161 s/g" but it will barely turn over a rebuilt K341.

Any help much appreciated.

There may be a slight difference in the S/G's. There also can be a difference in the Pulley, depending if the engine has the ACR feature.

With out Tractor Model numbers, that is the best I can offer.

The starter generators are the same for k161-k341 Kohlers on Cub Cadets.

I took 2 of them into my rebuilder this spring.
According to him, one was a regular unit and one was a hi-torque unit.
Looked then same to me except for the part numbers is all.

According to Cubcadet.com parts, the starter generators for model 72 (k161) is the same for 169 (k341). Earlier models had some variations such as pulleys and the little oilers at the bearing caps.

The old farts books come in handy for looking up part numbers and comparing them to the other model wf.

Masterful Old Fart....bestow upon us the wisdom from thine books! :biggrin2: Inquiring minds want to know. :bigthink:

The K161 thru 301 use the 1101996 Delco Remy S/G. The K161 and 241 uses the 393620-R1 pulley, the K301 use the 385446-R2 pulley.
The K321 uses the 1101691 S/G and the 393620-R1 pulley.
The K341 uses the 1101692 S/G and the 393620-R1 pulley.
I read the book, I am a fart smella.

I leeernd sumthin! :biggrin2: Thanks for the information ye old fart smella. :beer2:

Here are all the S/G that IH used on Cub Cadets...... S/G