1650 motor mounts
 

The lower mounts on my 1650 are bad...again:bash2:. Is there a better mount than what I got from my IH shop, for at least the bottom 4?

You really can't do any better than the bottom mounts in my opinion.

I agree, with Matt. I'd also go with the mounts from Cub Cadet.

You can move the top ones to the bottom and replace the top ones with a moog kit.

If he already has the newer style ISO mounts from Cub Cadet and they went bad they are not like the original ISO rubbers that came on the cubs, they were identical top and bottom.

I dont think the newer style tops will work good on the bottom.

The mounts I have are the same top and bottom. They just don't seem to last.
The rubber gets real distorted or cracks,maybe the ones i'm getting are not real cub parts?

If you purchased them recently from a Cub Cadet dealer and he sold you the stock replacemant ISO rubbers they should be different top and bottom.

Maybe you could post of picture of what you have.

I'm guessing they were NOS ISO mounts and that's whey they didn't last, really old rubber...