982 with a 450 blower
 

Is the 954-0341 belt correct for the 982 with the 450 snowblower? Pic attached is the blower on the front of the tractor... :beerchug:

According to the Parts Manual, the correct belt for a 190-450 Snowblower on a 982 would be 954-0340.

Way to short! I put a 90” belt on that I had laying around and it fit. That’s why I’m thinking a 0341 belt is the right belt. :bigthink:

Then there is something abnormal about your situation.

The correct belt for a 450 blower on a super is a 954-0341 at 89" long. The 954-0340 belt is for non-super applications. That belt is 84" long.

OK....where was that information found....???:bigthink:

:Work:

Done some more research. The 190-450 snowblower needs Mounting Kit 190-448 to be mounted on a SGT (ie: 982, etc).

Within that kit, the 754-0341 -----> 954-0341 belt is used. Thus that would be the correct belt.

Here is another Cub Cadet error in their Parts Manuals or Web Site. There was NO reference to a different belt being used in SGT applications. I found this doing a "backward cross reference".

Thus, "sbauerz28" was correct and I was wrong.

Sorry for the incorrect information....:Sorry:

The belt is part of the blower extension brackets sold to convert the blower to work on a super. It's part of the Cub 448 Snow Thrower lift kit accessory.

I'm thinking you need a cab on that 982 to blow snow.:biggrin2:

Thanks. I did find that out after some digging. :bigeyes: