Fuel Line
 

Does anyone know where I can get a stainless or copper fuel line for the K161? I had 1 spare and used it, now need 1 more? Is there a supplier or a chance someone has one in their spare parts? :bigeyes:

You can buy 1/4" (OD) usually at any Hardware Store.

I need the whole works? Line and nuts.

Is it the same as steel brake line? Not sure about the brass nuts though.:bigthink:

Got one on the bench right now. And no, it is not for sale. Hard to read but the OD is 3/16 and a 1/8 drill bit fits inside.

If it is 3/16" OD, there is Copper tubing that size. That may be a tad harder to find. Usually a HVAC/R type of business carries it. I know I do.

Will that one work on a 7hp Kohler?
Why not? :biggrin2: One of you guys who knows how to make one should help me!

Looking at the picture Dirty Steve put up the 7 must be different than the 10 and 12. Join

I made mine for the "O" Ronnie. But I'm not going through the whole thread trying to find it. Sorry... I used copper tubing. Pretty easy to make, just take your time, so not to kink it. Never good when it gets kinked.:bigeyes:
Nuts I got from "somebody":biggrin2: