Snow Destruction System Feel free to Add your OWN!
 

So finally got around to getting the 782 BEAST set up for snow removal.
had to fab up some new brackets for the Power angle blade. Since the 782 has larger tires, and a supersteer front axle the blade when angled was up almost an inch at the corners. and we wanted the R-Bucket to lift just a bit higher.
The blade lifts around 8" and the bucket at the cutting edge is 26" up so can dump a lot higher. so with 1000# lift on the 3pt and 14,5" travel between the R-bucket and the Angle blade I dont think I will have any trouble with Any amount of snow that we would get this year. Hope to have the hydraulic top link on before Snow hits. That should make the bucket have another few inches and make it flatten out at about top seat level.
Now I Just Need Snow....:biggrin2:

Always love seeing this one. It's just cool to see what you guys can do.

I have some crazy ideas for the future of this one.

Let's cut the blade in half vertically and put one cylinder on each side connected to the other empty ports. Then you can v the blade or go the other way and make it a u for more pushing like the newer snow plows that are out there.

Or a left or right or both mid wing style for more area, I know it can handle it.

Or a grapple attachment on the back of the R bucket, yeah!

lol we were just talking about both of those last night.
I thing by next winter. mainly because we need to install 2 more diverters so we would have the ability to use them independently with just a flick of a switch.
Today we are adding a hydraulic top link.

That's cool, we think alike. I'm hoping it snows like crazy near you, would like to see a video of that baby. I think I remember a video of you moving some pea gravel or something with the bucket.

https://www.youtube.com/watch?v=nknQ-fF892Q

https://www.youtube.com/watch?v=QEpY5IQ3b1Y&t=1s

You are definitely ready for some snow!

:OMG::Shocked::Shocked::Shocked::Shocked:

I think he has your shop bugged!!! Every stinking idea we have been talking about THIS guy just brought up!! SCARY!! LOL

Oh yeah, a plow like say a Boss with independent sweeps would be, well sweet.:beerchug:

Its in ths plans! Right now we are working on the hydraulic top link. Its a little project, but will be useful / usable when done... :beer2:

Hurry up slow poke's. :biggrin2:

:popcorn: