Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Steering Column (https://www.onlycubcadets.net/forum/showthread.php?t=46329)

ambrola 10-20-2016 07:05 PM

Steering Column
 
I took the steering column out of the 4 digit to clean it up and to my surprise, this is what I found. It doesn't look home made on the dash, but it's all wrong, or is it?

[URL="[URL=http://s458.photobucket.com/user/ambrola/media/DSC_0005_zps5pszxc8n.jpg.html]http://i458.photobucket.com/albums/q...ps5pszxc8n.jpg[/URL]"]

[URL="[URL=http://s458.photobucket.com/user/ambrola/media/DSC_0006_zpsiixt6a8a.jpg.html]http://i458.photobucket.com/albums/q...psiixt6a8a.jpg[/URL]"]

ambrola 10-20-2016 07:08 PM

The metal tube section has been cut and only meets the bottom of the dash? I am stumped on this because it does not look like that dash has been jimmy rigged. But you can only use that steering column. Here it is but it's soaking in cleaner. Any ideas?

http://i458.photobucket.com/albums/q...pssgnudybi.jpghttp://i458.photobucket.com/albums/q...psehjl0ifc.jpg

J-Mech 10-20-2016 07:15 PM

Someone has hacked it up. Even the pics I have of the field test versions have a column that goes through the dash and a grommet just like the production versions. Yep..... you need another column.

ambrola 10-20-2016 08:37 PM

Quote:

Originally Posted by J-Mech (Post 396850)
Someone has hacked it up. Even the pics I have of the field test versions have a column that goes through the dash and a grommet just like the production versions. Yep..... you need another column.

Thanks Johnathon, but another column will not work? It won't fit through the dash? I tried with a spare I have. That piece that sits on top of the column takes up the difference where a normal column would just fit through the dash. But that dash is smaller then the column?:bash2::bash2::bash2:

Alvy 10-20-2016 08:46 PM

Ronnie that piece looks like it was riveted in at 6 o'clock. Drill it out and it will fall out more than likely

J-Mech 10-20-2016 08:55 PM

Quote:

Originally Posted by Alvy (Post 396871)
Ronnie that piece looks like it was riveted in at 6 o'clock. Drill it out and it will fall out more than likely

:IH Trusted Hand:

darkminion_17 10-20-2016 08:58 PM

What he said.you gotta wonder about those po mods

cubcadet 10-20-2016 09:00 PM

I agree, a weird po mod, yes drill it out.

Yosemite Sam 10-20-2016 09:09 PM

Mike's right, take that piece out of the dash and get a new tube (and rubber) for your column and all should be well.

ambrola 10-21-2016 09:24 AM

I guess I need to just take the dash completely out and look at the bottom of it. It doesn't look like it has rivets, but that one at 6 o'clock? Would one rivet hold what ever they did? I will never find a dash without the hole in the side like the later models.:bash2::bash2::bash2: I will drill it out today and see if it will come out. I wonder why they did this?


All times are GMT -4. The time now is 08:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.