Brakes - Relining Discs
 

Here is the brake lining 3" X 3/16. You just cut it 8" long and then in half 1 1/2" then cut it 4" long and that will give you enough for one tractor. Here's what they looked like at the start.

https://s25.postimg.cc/d3cknagsf/100_3335.jpg

https://s25.postimg.cc/ddk36mven/100_3334.jpg

Check this spot for too much wear. You may have to build it up with a welder and smooth or shape it back down to what its suppose to look like.

https://s25.postimg.cc/6yl29yoov/100_3332.jpg

Just put that liquid plastic steel on it and put them in a vise overnight and your done.

https://s25.postimg.cc/bcy4zjon3/100_3336.jpg

https://s25.postimg.cc/hrx5w7vcv/Brake_Relining-6.jpg