2130 stuck in netural
 

My cc2130 ags is stuck in neutral. What could have caused this to happen?

Something in the linkage is messed up, something in the trans is messed up, something in the clutch pack is messed up. Hard to say from here. Your going to need to do a little more research for us to give you a good answer.

Drove it some yesterday and was fine parked it in the garage now it is stuck. its been in the 20's here and the garage isn't heated I'm wondering if something didn't freeze.

Take a look underneath. :bigthink:

Did the belt come off? ....... :bigthink:

2130 is shaft drive, no belt.

Will investigate some more tomorrow.

All those pulleys in the OP's other thread made me think it was a belt drive.

Nope that was just for the snow blower. Took one look at that design and decided that I'm glad it's not my machine. Only MTD could come up with something that messed up. I feel for the owner.

Ok so I took apart the back today since its nice out today. I removed the rod off of the transmission lever and it wont budge at all what is the next step? The arm in the 4th pic with the shims moves freely.

Attachment 71808

Attachment 71809

Attachment 71810

Attachment 71811

Attachment 71812