HELP! secondary clutch arm lever on 108
 

Throwing snow today with my 108. was working great and dependable like it has for years. then the auger stopped in pile of snow.
I backed up disengaged auger. still did not work
had to get the machine off the street near end of drive ways and back to garage to work on it

there i saw the lever that makes contact with clutch plate is now just a lever with a bolthole in it !!! looked at road and just snow no parts:bash2: the hardware is gone and snow throwing is toast until new parts identified and bought
please help!
Thanks

PTO clutch?
Or the go go one.

Todd-Sounds like you're talking about your PTO clutch. Sounds like your fiber button is gone. Buy 2 bronze ones from Jeff in PA. You'll have an extra then. Post a pic so we know for sure.

Its the clutch on front of 108 engine. the manual level on left hand side of tractor operates a metal rod on right side. the rod runs past the starter, to the front plate on clutch. The lever that touches the faceplate of clutch has just a bolthole now. Things are missing (hardware). How do i contact jeff in pen?
Thanks big!!

Time for a pic of what you have remaining of the PTO clutch. My guess is the arm got into the rotating parts and munched up your PTO. If that's that case you just joined the PTO clutch rebuild club. The experts will lend professional opinions once the pics are posted.

PTO is either this one or the udder...

I'll send you a PM with my email.

Jeff

http://i1182.photobucket.com/albums/...ps1gfxqbja.jpg

Here is pic

Yep, it's messed up. Go to the tech library and down load the how to rebuild your PTO

WOW:bigeyes: I've never seen one that bad.