Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   1200 and headlights (https://www.onlycubcadets.net/forum/showthread.php?t=4184)

lmcclinton 05-02-2010 10:07 AM

1200 and headlights
 
Sure would like to add headlights to my 1200. Any suggestions?

tubbyfirefighter 05-02-2010 09:47 PM

duct tape and flashlights?:biggrin2.gif:

truckntran 05-02-2010 10:19 PM

Start checking out Ebay for any quietline headlights..or you can adapt the rubber bulb holders to your screen in the upper grille, but the right stuff looks better.

tubbyfirefighter 05-02-2010 10:22 PM

I wonder why they didnt put them on 1200's

ACecil 05-02-2010 10:44 PM

You can also check with our sponsors at the top of each page, or place a wanted ad. :beerchug:

lmcclinton 05-03-2010 05:39 AM

Okay, thanks fella's....

bignastyGS 05-03-2010 06:32 AM

I did like above. I placed a want ad for headlights and people came out of the woodwork. Got the front panel,wiring harness and rubbers as well as the wire clip for 50 bucks,then located a good used headlight switch for 25 bucks. I went to my local cub collector buddy and bought the tails for a few bucks then. It helped to get things from a matching tractor as it was a direct bolt in and I didn't have to do much more than plug and play.I recently put lights on my sons 108,but I had to make my own wiring harness. Wasn't difficult,but took a little more initiative.

lmcclinton 05-03-2010 03:54 PM

You're the one I was looking for
 
Quote:

Originally Posted by bignastyGS (Post 27695)
I did like above. I placed a want ad for headlights and people came out of the woodwork. Got the front panel,wiring harness and rubbers as well as the wire clip for 50 bucks,then located a good used headlight switch for 25 bucks. I went to my local cub collector buddy and bought the tails for a few bucks then. It helped to get things from a matching tractor as it was a direct bolt in and I didn't have to do much more than plug and play.I recently put lights on my sons 108,but I had to make my own wiring harness. Wasn't difficult,but took a little more initiative.

I saw your tractor in another section but couldn't rem. your username. I wanted to ask you how you went about getting lights on your 1200. Did you post on here for the parts?


All times are GMT -4. The time now is 10:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.