Pic of back of dash on a '96 1810 or equiv PLZZ!
 

Ive got some wiring confusion issues behind my dash. Anybody have some pics as schematics make my ears bleed. I typed a long explanation and it went away. Basically the tractor wont start with keyswitch but will start when i jump the solenoid. Once started it wont shut off with the key, the pto wont engage and I am lost. Key switch bad maybe. I still think some wiring is not right. Thanks from NC! Jeremy

If you can't read a schematic, I don't see how pics are going to help. All as you are going to see is how the wires look before going into the loom. Knowing where they go and how it works is what you need...... which would be a wiring diagram. Do you need a copy of that?

Yeah...I can read them just having a weird, difficult time finding one with my exact colors. The loom is original or so I have been told. If you have one I would be love it. Thanks for the response.

It's in the chassis service manual.... right here in our tech section.

Here is the manual....... Chassis Manual

Depending on serial number of the machine:

Page 2-55, or 2-59.

Serial# is 786707. Thanks again for the help. I hope its just my key switch. Thats if I can find one on a Sunday!

Most all parts stores carry that switch. Pretty standard for all lawn equipment.

Pretty interesting that it won't start OR shut off with the key. Could be the switch..... maybe.

Just a quick ? The 2 wires coming off the fuse...One to the solenoid and one to the voltage meter, correct?

No.....
Out of the fuse to the ammeter. That's it.

Yep that works. Are there better connectors than the original round slide on ones that youve used? Originals dont hold well.

What? :bigthink: