Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Questions cyroul for the restoration of my 1200 cub (https://www.onlycubcadets.net/forum/showthread.php?t=3086)

cyroul 02-13-2010 05:25 AM

Questions cyroul for the restoration of my 1200 cub
 
Questions cyroul for the restoration of my 1200 cub

Hi everybody, I need advice about my cub engine, because I do not know where to start. What it is imperative to verify that they are wear parts has changed? When I recovered I tried to reboot, it did not, and made a valve was sticking. I take off the manipullant from top to bottom and has Started the quarter without starter. Does this side there should be lapping the valves? :bigthink: thank you

http://img402.imageshack.us/img402/3866/moteur1n.th.jpg http://img28.imageshack.us/img28/1421/moteur2w.th.jpg http://img218.imageshack.us/img218/5504/moteur3.th.jpg http://img94.imageshack.us/img94/4829/moteur4.th.jpg

MBounds 02-13-2010 06:40 AM

Cyril...

I included an engine manual. It is on the way...

Myron B

cyroul 02-13-2010 06:59 AM

Ok that's great, I was hoping that I'll come to understand ...... if you are working happily here :biggrin2.gif:
__________________________________________________ __________________________________________________ __________________________________________________ __

cyroul 02-26-2010 05:37 AM

Hi to all
I need help to remove the pto my cub, because I do not know how and the documentation it does not say much. There is cerclips I can not disassembled, there's no power to shake well, and how to place my hard hubs for not breaking anything.
thank you

http://img90.imageshack.us/img90/9159/pto1.th.jpg http://img341.imageshack.us/img341/6899/pto2.th.jpg http://img218.imageshack.us/img218/5982/cub1.th.jpg http://img213.imageshack.us/img213/6530/cub2.th.jpg

R Bedell 02-26-2010 07:34 AM

1 Attachment(s)
Good Morning Cyroul:

Click on this link..... Manual and look on page 2-81B.


Cliquez sur ce lien ..... Manuel et regardez à la page 2-81B.

cyroul 02-26-2010 11:31 AM

The 5 bolts I've disassembled it is not the problem, I do not know how to put myself to pull the pulley as a schematic he spoke of a cerclips, but I think it should serve as a place bearing . In addition I am really stupid, I just found by looking more closely at the documentation that I received myron. Thank you Mr. Roland. Do I keep this post to post pictures of the progress of the restoration of the cub?


All times are GMT -4. The time now is 02:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.