Cub Cadet 1450 hydraulic lift HELP!!!!
 

I was wondering if anyone has pics of teh hydraulic linkage to the lift handle assembly. I am kinda stumpped on a rebuild I'm doing :bash2:

Like this?

Attachment 48773

Your post is in the wrong section BTW.

I got that off of Partstree was looking for actual photos of the linkage and lift arm attachment. Sorry about the post being in the wrong place. New user

Welcome to OCC!

I moved your post for you, no big deal. I'm glad to help. I'm sure some of our guys will chime in with some good pics to help you.
:Welcome2:

I missed that you were new. Sorry bout that.

:Welcome2:


I don't have a single stick QL. I have a dual stick..... would picks of that help? It doesn't have the lift cylinder in it at present. You needing pics of the valve or the cylinder?

dual linkage
 

Here Ya go. I'm working on mine also.
PO really screwed it up by welding a piece of pipe on the outer tube, #8 in the pic. It's really a PITA to get apart, let me tell Ya!! I'm afraid I'm gonna have to break out the "whizzer".
On mine, part # 19 is pinned on w/a spirol pin, yours could either be like that or the clamp type pictured.
Do yourself a favor and make a trip to Sears and pick up a spirol pin punch set. You will get a lot of use out of it if you plan on working on your Cub(s) a lot. Good luck!!

her's a few pics under the tranny cover. if you want a different area let me know. in these pics the lift bar is black. the bend in the bar goes upwards and is closer to the front. partstree has a good picture of the lift parts

here's the partstree

Sorry I miss read your post. here's the best pic I have of that area