Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   How much weight do you add? (https://www.onlycubcadets.net/forum/showthread.php?t=28334)

bocephus1991 11-08-2013 12:41 PM

How much weight do you add?
 
How much weight do you guys add to push snow? I have AG tires and 73lbs per side on my 1211 . 42" blade pushing on concrete. :bigthink:

FlyingB 11-08-2013 01:16 PM

That weight is good but it would help more if you use turf tires with chains. Fluid in the tires is good also, it adds another couple hundred pounds.

J-Mech 11-08-2013 02:14 PM

My rears are loaded with liquid calcium. The tire, rim and fluid to together weigh 100lbs. Then, if needed I add the 75lbs wheel weights. But, I just added a cab to that tractor, so I'm going to make a run at it without the weights to try it. I think the cab weighs at least 100lbs.... maybe more. So to answer your question.... I add about 300lbs.

Sam Mac 11-08-2013 02:24 PM

Quote:

Originally Posted by J-Mech (Post 225017)
My rears are loaded with liquid calcium. The tire, rim and fluid to together weigh 100lbs. Then, if needed I add the 75lbs wheel weights. But, I just added a cab to that tractor, so I'm going to make a run at it without the weights to try it. I think the cab weighs at least 100lbs.... maybe more. So to answer your question.... I add about 300lbs.

Hope you have tubes in those wheels if your running CaCl2 in them.

J-Mech 11-08-2013 03:34 PM

Quote:

Originally Posted by Sam Mac (Post 225018)
Hope you have tubes in those wheels if your running CaCl2 in them.

Yeah, I do. The calcium was free, otherwise I'd used something else.

J-Mech 11-08-2013 03:46 PM

You know, for conversational purposes though..... I've been in the AG industry for a long time and the newer tractor (90's and up) went to tubeless tires. When they add liquid cal to them they don't tube them. Never really saw any ill effects of it. I personally wouldn't do it..... but they do.

kostendorf 11-08-2013 04:08 PM

I've got chains and 75# weights on turf tires with me at 210# in the seat. If I need more I've got cast iron body building weights I can add like the pullers use on the back lift. Adding any weight off the axles though will prematurely wear the axle bearings and promote leaks.

vartz04 11-08-2013 04:46 PM

Do you have problems with the rear lift going up and down and the weight hitting anything?

Sam Mac 11-08-2013 04:48 PM

2 Attachment(s)
Quote:

Originally Posted by J-Mech (Post 225029)
You know, for conversational purposes though..... I've been in the AG industry for a long time and the newer tractor (90's and up) went to tubeless tires. When they add liquid cal to them they don't tube them. Never really saw any ill effects of it. I personally wouldn't do it..... but they do.

John

These were also tubeless and we also ran CaCl2 in the rear tires. I think that the way the rims are designed allows them to be filled to the point that the rim is submerged and maybe that's why they don't get rotted out as bad. Just a guess. :bigthink:

782CC 11-08-2013 05:28 PM

for my son @ 80lbs. 350 to 400lbs total. Each wheel gets 50lb inside weights, 75lb outside, and fluid 50lbs??? Then have some weights to hang off the back if needed. 50 lb I think. Currently on AGs and chains but plan to get turfs for winter. Found more weight allows better control as to light and you will have to hit it sometimes to move harder snow. I could easily push more than he with less total weight and turfs with chains.

Oh, snowthrower on the front may tweak those numbers a bit. That was all on a blade setup. but I think it will be enough.


All times are GMT -4. The time now is 06:57 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.