| jimbob200521 |
07-09-2013 10:53 PM |
You're going to get a LOT of the same answer on what fluid to run in your tranny, and that same answer is going to be hy-tran. And before you research for hours, the biggest thing that separates hy-tran from other tranny fluids is it's ability to trap and encapsulate moisture, that's probably what that sludge you cleaned out was. Only downside is hy-tran is pretty expensive.
As far as engine oil, SAE 30 is what you're going to want (as long as it's not below freezing). I use low-ash CC SAE 30 oil from my dealer because it's readily and easily available, runs me about $13 per oil change (that's for 2 quarts). If that's not available, just find some SAE 30 from a reputable brand, a lot of people recommend Shell Rotella SAE 30 and I may switch to that during my next oil change cycle because it's cheaper price wise, I can get it at Wally World by the gallon, and the quality is there.
Hope this helps, and good luck. Oh, btw, my charge is pics of your machine :biggrin2::beerchug:
|