![]() |
checking hyd level 125
I wanted to change the oil and filter on the hyd drive. didnt see any drain or fill location, any help with procedure Thanks Tadd
|
Pull the back cover to drain, there should also be a fill plug on the back cover. I find a funnel with a hose attached helps a lot when filling. Use a new gasket, sealer on the bolts is sometimes recommended. Hope ya got a BIG drain pan too.
|
125 hydro
any idea how much oil it takes thanks Tadd
|
It hold 7 quarts.
AJ |
It sounds like you could use a Chassis Service Manual for your 125.
Here is a link to a Chassis Service Manual. http://www.onlycubcadets.net/forum/showthread.php?t=230 It was found in our Technical Library section on this site. |
| All times are GMT -4. The time now is 10:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.