![]() |
What Generator Kit for 1967 123
First post here, but long time lurker.
My 123 was putting along just fine when the engine started slowing down, then died. Looks like the bearings in the generator are shot. I see that there are two repair kits available, one with two bearings and one with a bearing and a bushing. Does anyone know which one I am more likely to need. Thanks Bill |
You'll need to take your starter/generator apart and determine if it has bushings or bearings in it.
|
:Welcome2:
Cub Cadet 123 |
Welcome to the site. My son and I recently did an original S/G and it was not too bad to do. Since it is not operational now go ahead and take it apart and then you can see what you need as to repair kits. You may want to research some of the posts on here about tips on reassembly as that can be a little tricky without about 6 hands.
|
All times are GMT -4. The time now is 10:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.