Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Technical Tips (https://www.onlycubcadets.net/forum/forumdisplay.php?f=59)
-   -   Wheel bearings and wheels (https://www.onlycubcadets.net/forum/showthread.php?t=57649)

drglinski 09-14-2020 09:49 PM

Wheel bearings and wheels
 
Here's a small tech tip.

I bought some used narrow wheels for the front of my 73 this spring. When I got them the hole in the wheel for the bearing was too large (worn out). I tried shimming it up with an aluminum can only to have it work its way out. I was thinking it over this past week and while looking at very wobbly front wheels (new bearings) I was having remorse at buying them. Someone else told me to take out the bearings, lay the wheel flat, and lightly tap around the edge with a small hammer the center where the bearing inserts to tighten it up again. I did that and it made a huge difference! I no longer feel like throwing the wheels away.

If you are having a similar issue this may help you. Time will tell how long they hold up for.


All times are GMT -4. The time now is 10:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.