Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Customized Cub Cadets (https://www.onlycubcadets.net/forum/forumdisplay.php?f=11)
-   -   Another turbo installation (https://www.onlycubcadets.net/forum/showthread.php?t=51188)

MikeMasheris 01-28-2018 01:37 PM

Another turbo installation
 
4 Attachment(s)
Starting on a new installation on a 1772.Turbo drive line upgrade rear pto 3 point. Going to be tight but will fit.

DieselDoctor 01-28-2018 02:39 PM

Hmmm - looks familiar. Hope to put the D600 into my 2072 this spring and install your kit. Are you planning on using the stock Kubota muffler on the 1772? Or just build off of the stock flange?

MikeMasheris 01-29-2018 02:23 PM

Use the muffler and I have a stack with a flange on it.Once I get the pipes figured out they will be an option for the kit.

twoton 01-29-2018 04:15 PM

:popcorn:.

DieselDoctor 01-29-2018 06:17 PM

1 Attachment(s)
The pipe I built for the 782D Turbo looked similar to a sink trap, but exited thru the side panel at the stock location. I used the segmented pipe sections meant to fabricate headers on race cars etc. If I remember, I bought a 180 U bend and a couple of 30 and 45 degree sections. Add a little mig wire and I had a header.

MikeMasheris 02-23-2018 12:17 PM

3 Attachment(s)
Got some progress done driveline upgrade rear pto in have to modify the lift bar for the 3 point the supers don't have much float so I need to extend bar with a slot to let it float.

CubDieselFan 02-24-2018 01:57 PM

Another cool turbo build. About how much extra power does the turbo add?

MikeMasheris 02-25-2018 12:23 PM

A lot of bottom end torque and 9 pounds of boost on a full pull.

MikeMasheris 02-25-2018 12:30 PM

2 Attachment(s)
Got the rear PTO on and 3 point mounted I made the lift bar longer 2-1/2'' sloted to let it float like the smaller Cat-O hitches. Got the True Powers mounted what a PITA to get on the rim and bead up good thing I bought 4 ply instead of 6 ply.Mounting the V61s today

gt383mag 03-31-2018 09:26 PM

Quote:

Originally Posted by MikeMasheris (Post 446909)
Got the rear PTO on and 3 point mounted I made the lift bar longer 2-1/2'' sloted to let it float like the smaller Cat-O hitches. Got the True Powers mounted what a PITA to get on the rim and bead up good thing I bought 4 ply instead of 6 ply.Mounting the V61s today

looks like the tank from my 782d is different than yours mine has the notches for the fender mounts but pokes out on each side. im guessing that a super three point isnt gonna fit looks like the rock shaft arms are gonna hit the tank


All times are GMT -4. The time now is 09:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.